Used for: Program Toyota Lexus Transpnder 4D Key ( All keys are lost or add new key)

suitable for: Toyota or Lexus key with type 4D Transpnder chip

Models it programs

2003-2008 Lexus GX470 (Japan)

2003-2008 Lexus LX470 (Japan)

2004-2005 Lexus ES330 (Japan)

2005-2008 Scion TC (Japan)

2003-2006 Toyota 4Runner (Japan)

2005-2007 Toyota Tundra (California & Japan)

2004-2008 Toyota Sienna (Indiana, Kentucky, Japan)

2005-2008 Toyota Corolla (Canada, Indiana, Japan)

2007 Toyota Camry (Indiana) Reset only Note: Need PGM to Add key to system 45 secs

2003-2008 Toyota Landcruiser (Japan)

2004-2007 Toyota Highlander (Japan)

2005-2008 Toyota Matrix (Canada & Japan)

2003-2005 Toyota Camry Type 2 System

2004-2008 Toyota Rav4 (Japan)

2005-2006 Toyota Tacoma (Japan

2004-2006 Toyota Solara

Toy-Pro Device [suitable for all key lost]

With this OBD by-pass adaptor , you can program till year 2008 all type of Toyota / Lexus 4D transponder key in less than a minute.

PS: you need to use the correct transponder key blanks.

not need to remove any chip , only connect the obd-2 port , then turn on the lock , the key is ok !

TOYOTA KEY PROGRAMMING DEVICE program key for 7 seconds,We have been tested on Land Cruiser 2002 +, RAV 4 2002 +, PRADO, HIACE, Hilux and all Lexus cars till 2007 .

GUIDE: 1) Matches 2 pcs master key and 1 pc vice-key to the IMMO computer

Step 1 -> Step 2 -> Step 3 -> Step A

2) Only program 1 or 3 master keys to the IMMO computer

Step 1 -> Step 2 -> Step 3 -> Step B

Manual Toyota key programmer OBD

This Toyota TEXAS CRYPTO 4D transponder key programming tools is designed simple, and operate easily through OBD-II diagnosis port directly

and no need to press any button. Support to program all kinds of Toyota 4D transponder key, and all kinds of Lexus transponder key, with the

original key programming protocol, non-general initialization protocol.

Safe and highly effective: Only about 10 second to program a new key; the anti-thelf system will not be damaged in safe using way, it is the most quickly and safest programmer.

The operating step as follows: ( read the using step and the importance notice carefully)

Step 1. Turn the ignition on with the correct 4D chip key.

Step 2. Connect the programmer to the OBD-II port of the car, there are some short beep sounds after power on. When the connection with the

Computer of car is done successfully, there is a long beep sound in 3 seconds, and the ˇ°LEDˇą is on, as well as the anti-light ˇ°SECˇą, which means the car is in the ˇ°key programming stateˇą.

Step 3. Take away the programmer from OBD-II.

Step [A] Matches 2 pcs master key and 1 pc vice-key to the IMMO computer Ł¨ Notice: 2 new master key and 1 vice-key are needed to close the programming procedureŁŠ

a) Close all the car door.

b) Insert the first new master key to the ignition for 5 seconds.

c) Insert the other master key to the ignition for 5 seconds.

d) Insert the vice-key to the ignition for 5 seconds.

e) The new ignition key will be confirmed by the new IMMO.

Step [B]Only program 1 or 3 master keys to the IMMO computer( Manual close the mode after complete the programming)

a) Close all the car doors.

b) Insert the new key for 5 seconds.

c) Insert another new key for 5 seconds.

d) Take out the key from ignition

e) Insert the first programmed master key, and turn on the ignition for 5 times quickly, then take it out.

f) The new ignition key will be confirmed by IMMO

Notice:

1, Must use the correct type Toyota 4D transponder key, otherwise you take the consequences.

2, DonˇŻt try to open the cover of programmer and dash board.

3, This machine is only provided for the legal auto repair.

Otherwise you will take the above consequences.

Some type of The parado 4700 and Camry 2007 maybe not suitable for this device

The type of the car:

ABOUT ALL THE TOYOTA LEXUS CAR ,WHICH IS USE 4C OR 4D TRANSPONDER KEY BLANKS

SEE THE PICTURE HERE :

4C chip key

4D chip key